Turning The Meter On And Off:
Turning Your Meter On:
- To perform a test, insert a test strip as far as it will go. The meter will briefly perform system checks, then the display will turn on.
OR
- With the meter turned off, press and hold OK for two seconds to access MAIN MENU. Check that the screen shows solid black for two seconds.
- If it does, the display is working properly.
- If the meter does not power on, try changing the meter battery.
- Caution:
- If you see any light areas within the black start-up screen, there may be a problem with the meter. If the problem persists, contact OneTouch® Customer Care.
Using The Meter Display Backlight:
- When the meter is already on, press and hold OK for two seconds to turn the backlight on or off.
Turning Your Meter Off:
- There are several ways to turn your meter off:
- Press and hold OK for five seconds.
- Your meter will turn off by itself if left alone for two minutes.
- Go to MAIN MENU and press ↑ or ↓ to highlight METER OFF, then press OK.
- Before or after completing a test, remove the test strip. If you advance from the test result screen to the MAIN MENU by pressing OK, removing the test strip will not turn the meter off. Use one of the three methods above.
