Editing your range limits:
- Your meter uses low and high range limits to tell you when your result is below, above or within your set range. The meter comes with pre-set range limits that can be changed. The pre-set low range limit is 4.0 mmol/L and the pre-set high range limit is 10.0 mmol/L.
- To edit the pre-set range limits press and hold ↑ and ↓ at the same time. The SET screen will appear with the current low range limit displayed, and the number and range indicator arrow will flash.
- NOTE: The low and high range limits you set apply to all glucose test results. This includes tests taken before or after mealtimes, medications and around any other activities that may affect your blood glucose.
- CAUTION:
- Be sure to talk to your healthcare professional about the low and high range limits that are right for you. When selecting or changing your limits, you should consider factors such as your lifestyle and diabetes therapy. Never make significant changes to your diabetes care plan without consulting your healthcare professional.
1. Review the pre-set low range limit displayed
-
- To accept the pre-set low range limit, press OK.
- To edit the pre-set low range limit, press ↑ or ↓ to change the value between 3.3 mmol/L-6.1 mmol/L, and then press OK.
2. Review the pre-set high range limit displayed
-
- To accept the pre-set high range limit, press OK.
- To edit the pre-set high range limit, press ↑ or ↓ to change the value between 5.0 mmol/L-16.7 mmol/L, and then press OK.
- Your meter will exit settings mode and your last result screen will appear.
- NOTE: If you change your range limits, this will only affect whether future test results are displayed as below, above or within your range limits. Changing your range limits does not affect how past results are displayed.
- NOTE: You will not be able to perform a glucose test until you finish editing the range limits.
- NOTE: You can use the OneTouch Reveal® Mobile App on your compatible wireless device to change the range limits stored in your meter. See the instructions that came with the app for more information.
