OneTouch Verio Flex® - First time setup

• To turn your meter on, press and hold OK until the start-up screen appears. Once the device is on, release OK. The meter will now automatically prompt you to set the time and date. The SET icon will appear on the screen to indicate that the meter has entered setup mode.

• Setting the time:
  • Hour will flash:

• • • If the hour displayed is correct, press OK to confirm.
    • If the hour displayed is not correct, press ↑ or ↓ to change the hour and press OK to confirm.

• • Minutes will flash:

• • • If the minutes displayed is correct, press OK to confirm.
    • If the minutes displayed is not correct, press ↑ or ↓ to change the minutes and press OK to confirm:

• • AM/PM will flash:

• • • If the AM/PM displayed is correct, press OK to confirm.
    • If the AM/PM displayed is not correct, press ↑ or ↓ to change AM/PM and press OK to confirm.

• Setting the date:
  • After completing the time setup, the meter will automatically move to date setup.

• • Year will flash:

• • • If the year displayed is correct, press OK to confirm.
    • If the year displayed is not correct, press ↑ or ↓ to change the year and press OK to confirm.

• • Month will flash:

• • • If the month displayed is correct, press OK to confirm.
    • If the month displayed is not correct, press ↑ or ↓ to change the month and press OK to confirm.

• • Day will flash:

• • • If the day displayed is correct, press OK to confirm.
    • If the day displayed is not correct, press or ↑ or ↓ change the day and press OK to confirm.

• • You are now ready to take a test.
    • OneTouch Verio Flex® - Testing Your Blood Glucose

• • NOTE: After completing first time setup, a screen with three dashes will appear. Once you begin testing, your last result will appear in place of the three dashes, along with the date and time the test was taken.

• Adjusting the time and date settings after first time setup:
  • You can adjust the meter's time and date settings after first time setup. Press and hold OK to turn the meter on, then press and hold OK and ↓ at the same time. The SET screen will appear.
    • OneTouch Verio Flex® - Editing time and date
  •   After adjusting the settings, your meter will exit settings mode and your last result screen will appear.​​​​​​​

• OneTouch Verio Flex® - Product Guide
• OneTouch Verio Flex® - Testing Your Blood Glucose
• OneTouch Verio Flex® - Editing time and date
• OneTouch Verio Flex® - Turn your meter on
• OneTouch Verio Flex® - Getting to know your system

AW 06932607 A