OneTouch Verio® Mid Control Solution:
- For in vitro diagnostic use. For self-testing.
- IMPORTANT: Please read this insert and the User Guide or Owner's Booklet that came with your system before using.
Intended Use:
- For use with the OneTouch Verio® Family of Blood Glucose Meters and OneTouch Verio® Test Strips to check that the meter and test strips are working together properly and that you are doing the test correctly.
Summary and Explanation:
- OneTouch Verio® Control Solutions contain known amounts of glucose that react with OneTouch Verio® Test Strips.
- Your result should fall within the range of results printed on the control solution vial you are using.
- Use only OneTouch Verio® Control Solutions. Either level can be used to check your system.
- WARNING: Keep the meter and testing supplies away from young children. Small items are choking hazards.
Do a control solution test:
- When you open a new vial of test strips.
- If you think the meter or test strips are not working properly.
- If you get repeated unexpected blood glucose results.
- If you drop or damage the meter.
Test Procedure:
- Read your system User Guide or Owner's Booklet for instructions on how to run a control solution test.
Composition:
- Control solution consists of a viscosity-adjusting agent, a preservative, a dye, a buffer and glucose in water:
- OneTouch Verio® Mid Control Solution 0.12%.
- 75 tests per vial.
Important Safety Information:
- The expiration date is printed on the vial.
- The discard date is 6 months after you first open a control solution vial. When you open a new vial, write the discard date on the label.
- Do Not use after the expiration or discard date, whichever comes first.
- Make sure your meter, test strips, and control solution are at the same temperature before testing.
- CAUTION:
- Do Not swallow or ingest control solution.
- Do Not apply control solution to the skin or eyes as it may cause irritation.
Storage and Handling:
- Close the vial tightly right after use. Store the control solution in a cool dry place between 5°C and 30°C. Do Not refrigerate.
Expected Results:
- Control solution test results should fall within the expected range printed on the label of the control solution vial used for testing.
- OneTouch Verio® Mid Control Solution (Blue cap): 5.7-7.7 mmol/L
- If a test result falls outside the expected range, it may mean:
- You didn't follow all the instructions for control solution testing in your User Guide or Owner's Booklet.
- Control solution is contaminated, expired or past its discard date.
- Test strip or test strip vial is damaged or past its expiration date.
- Meter, test strips and/or control solution were not all at the same temperature when you ran the control solution test.
- A problem with the meter.
- Repeat the control solution test with a new test strip.
- CAUTION:
- If you continue to get control solution test results that fall outside the range on the control solution vial, Do Not use the meter, test strips, or control solution. Contact Customer Service.
- Ranges printed on the control solution vials are for control solution tests only and are not recommended ranges for your blood glucose level.
Performance Characteristics:
- See your system User Guide or Owner's Booklet.
OUR COMMITMENT TO YOU:
- Our goal is to provide you with quality healthcare products and dedicated customer service. If you are not fully satisfied with this product, or if you have questions about the use of any LifeScan product, contact Customer Service. If you cannot reach Customer Service, contact your healthcare professional for advice.
- For a complete list of all symbols used, refer to the User Guide or Owner's Booklet that came with your system.
