Adjusting Range Limits And 90 Day Average Target:
- Note:
- If you adjust your range limits, your previous Range Indicator icons in the Results Log will not change. Only new results will be affected by your range limit changes.
- Consult with your healthcare professional about the range limits and 90 Day Average Target that are right for you.
Instructions:
1. From the Settings Menu, press ↑ or ↓ to highlight Range/90d (or Range for Basic Mode) and press OK
-
- Your current meter settings are displayed.
2. Highlight the range setting to be adjusted and press OK
3. Adjust the Low Limit and press OK
- Repeat this step to change the High Limit. For information about Before and After low and high limits, see article: OneTouch Verio Reflect® – Setting Up Your Meter
- Note: In Basic Mode, range limits are general and are not defined by mealtime. General range limits are pre-set.
4. To adjust the 90 Day Average Target, highlight the 90d Target setting and press OK
5. Adjust the 90 Day Average Target and press OK
- The meter is pre-set with a 90 Day Average Target of 155 mg/dL. The minimum 90 Day Average Target is 99 mg/dL and the maximum is 265 mg/dL.
- Note: Be sure to talk to your healthcare professional about the 90 Day Average Target that is right for you.
