OneTouch Verio Reflect® – Error 4

• What it means:
  • One of the following may apply:
    • Not enough blood or control solution was applied or more was added after the meter began to count down.
    • The test strip may have been damaged or moved during testing.
    • The sample was improperly applied.
    • There may be a problem with the meter.
  • Error 4, sub-code 2 can be caused by testing using control solution without setting the meter to display “Apply Control Solution”.

• What to do:
  • If testing with control solution, go into the meter Settings and select Control Solution. Then insert the test strip and wait for “Apply Control Solution” to appear on the screen.
    • OneTouch Verio Reflect® – Testing with Control Solution 
  • Repeat the test with a new test strip. 
    • OneTouch Verio Reflect® – Preparing The Meter For A Blood Glucose Test - Notes and Cautions
    • OneTouch Verio Reflect® - Preparing The Meter For A Blood Glucose Test  
    • OneTouch Verio Reflect® - Sampling Blood From The Fingertip
    • OneTouch Verio Reflect® – Applying Blood And Reading Results
    • OneTouch Verio® Test Strips - General Information
  • If the error message appears again, contact OneTouch^® Customer Care.

• OneTouch Verio Reflect® - Product Guide
• OneTouch Verio Reflect® – Preparing The Meter For A Blood Glucose Test - Notes and Cautions
• OneTouch Verio Reflect® - Preparing The Meter For A Blood Glucose Test  
• OneTouch Verio Reflect® – Testing with Control Solution
• OneTouch Verio Reflect® - Sampling Blood From The Fingertip
• OneTouch Verio Reflect® – Applying Blood And Reading Results
• OneTouch Verio® Test Strips - General Information
• OneTouch Verio Reflect® – View Meter Info and Last Sub-Error Code
• OneTouch Verio Reflect® – Other Messages
• OneTouch Verio Reflect® – Error Low Battery
• OneTouch Verio Reflect® – Error Battery Empty

• OneTouch Verio® and Ultra Plus - Error Sub Codes

AW 07201105A 
FILE-REC-0126026