Viewing Your Result:
ColorSure® Dynamic Range Indicator:
- The OneTouch Verio Reflect® Meter comes with a ColorSure® Dynamic Range Indicator feature that instantly lets you know if your current result is below (blue), within (green) or above (red) your range limits. It also shows when your result is near the low or high end of your target range. It does this by displaying your result with a Range Indicator icon pointing to a segment on the Color Bar based on the ranges you have set in the meter.
- The Range Indicator icon may be either an emoji (for example,
) or text (for example 
). Use the Range Indicator icon and the segmented Color Bar together to see where your result falls within your range limits.
-
- If the Test Tracker is turned on, progress toward the Daily Test Goal will be indicated above the result.
- If the Test Tracker is turned off, the date and time will be shown above the result.
- The date and time are always recorded with each result and can be viewed in the Results Log.
-
-
- WARNING: Confirm that the unit of measure mg/dL is displayed. If your display shows mmol/L rather than mg/dL, stop using the meter and contact OneTouch® Customer Care.
- CAUTION: Do Not make immediate treatment decisions based on the ColorSure® Dynamic Range Indicator feature. Treatment decisions should be based on the numerical result and healthcare professional's recommendation and not solely on where your result falls within your range limits.
- After the result screen appears, a Pattern Message, Mentor Tip or Award may be displayed. The Message can be dismissed by pressing OK.
-
- If you would like to bring the Message back, press OK again.
- A Before Meal tag will automatically be applied to your result.
- When you change a Before Meal tag to an After Meal tag, the Range Indicator icon may point to a different segment on the Color Bar. A new Message may appear.
