Setting The Meter Language, Time And Date:
- Before using your meter for the first time, you should check these settings. When you turn on the meter for the first time, you will automatically start at the Set Language screen.
1. Choose a language.
- In the Set Language screen press ↑ or ↓ to highlight the language you want and press OK.
- Pressing OK after making your selection confirms each setting and takes you to the next screen.
- When setting up your meter you can press
to return to the previous screen to adjust a setting. - Note:
- The time and date formats are pre-set. You cannot change these settings.
2. Set the time of day.
- In the Set Time screen press ↑ or ↓ to set the hour and press OK. Repeat this step to set the minutes. Press↑ or ↓ to set am or pm and press OK.
3. Set the date.
- In the Set Date screen, press ↑ or ↓ to change the month and press OK.
- Repeat these steps to set the day, then the year.
4. Confirm your settings.
- If your settings are correct press ↑ or ↓ to highlight Done and press OK.
- If a setting is not correct, highlight the incorrect setting and press OK to return to that setting screen.
- After confirming your settings, this screen will appear on the meter display.
- To set up the High/Low Pattern tool, highlight Set Up Now and press OK.
- To go to the Main Menu, highlight Later and press OK.
- Note:
- If you select Later, you can always set this feature up at another time by choosing Settings from the Main Menu.
