Replacing the battery:
- Your OneTouch Select Plus Simple® Meter uses one CR2032 lithium coin cell battery.
- IMPORTANT: Use only one CR2032 lithium coin cell battery with your meter. Do Not use rechargeable batteries. The meter will not function if an incorrect battery type is installed.
- If the meter does not turn on, you may need to replace the battery. See below for instructions.
- WARNING: CHEMICAL BURN HAZARD. DO NOT INGEST BATTERY. This product contains a coin/button cell battery. If swallowed, it can quickly cause severe internal burns and can lead to death. Keep new and used batteries away from children. If you think batteries might have been swallowed, seek immediate medical attention.
- WARNING: Certain batteries may cause leaking which can damage the meter or cause the battery to lose power sooner than normal. Replace leaking battery immediately.
1. Remove the old battery
-
- Start with the meter turned off. Remove the battery cover by pressing and sliding it downward.
-
- Pull up on the battery ribbon to lift the battery out of the compartment.
2. Insert the new battery
-
- Insert one CR2032 lithium coin cell battery on top of the battery ribbon, with the plus (+) side up.
3. Replace battery cover by sliding it upwards onto the meter
-
- If the meter does not power on after you have replaced the meter battery, check that the battery is correctly installed. If the meter still does not power on, contact Customer Care.
4. Dispose of battery
-
- Dispose of the battery according to your local environmental regulations.
