Downloading Results to a Computer:
- Your meter can work with diabetes management software, which provides a visual way to track key factors that affect your blood sugar.
1. Obtain the required software and cable
- For order information and to learn more about diabetes management tools available to you, contact OneTouch® Customer Care.
2. Install the software on a computer
- Follow the installation instructions provided with the Software. If using a OneTouch® Interface Cable (USB format), install the software driver.
- WARNING: To avoid a possible shock, Do Not insert a test strip when the meter is connected to a computer with the OneTouch® Interface Cable.
3. Get ready to transfer readings
- Connect the OneTouch® Interface Cable to the COM or USB port on your computer.
- Make sure the meter is turned off. If you insert the cable while the meter is already on, the meter will not respond to computer commands. Then connect the other end of the OneTouch® Interface Cable to the meter data port.
4. Transfer data
- Follow the instructions provided with the diabetes management software product to download the results from the meter.
- Once the command to start the download is sent from the computer to the meter, the meter display will show “PC” indicating that the meter is in communication mode. You will not be able to perform a test when the meter is in communication mode.
