To turn your meter on, press and holdOK until the start-up test screen appears. Once the device is on, releaseOK. You can also turn the meter on by inserting a test strip.
Every time you turn your meter on, a start-up screen will appear for a few seconds. All segments of the display should appear briefly, indicating your meter is working properly. If the meter does not power on, check the battery.
CAUTION: If you see any missing segments within the start-up screen, there may be a problem with the meter. If the problem persists, contact OneTouch® Customer Care.
Note: If you turned the meter on for the first time by inserting a test strip instead of pressingOK, you will not be able to perform a glucose test until you complete the first time setup.
To turn your meter on, press and holdOK until the start-up screen appears. Once the device is on, releaseOK. The meter will now automatically prompt you to set the time and date. The SET icon will appear on the screen to indicate that the meter has entered setup mode.
Note: After completing first time setup, a screen with three dashes will appear. Once you begin testing, your last result will appear in place of the three dashes, along with the date and time the test was taken.
You can adjust the meter's time and date settings after first time setup. Press and holdOK to turn the meter on, then press and hold OK and ↓ at the same time. The SET screen will appear.
