OneTouch Verio Flex® – Syncing Results Wirelessly

Syncing To Send Results Wirelessly To The OneTouch Reveal^® Mobile App:
 

• After pairing the meter with your compatible wireless device, you are ready to send results to the OneTouch Reveal^® Mobile App.
  • OneTouch Verio Flex® – Pairing Instructions

2. Press and hold OK to turn the meter on and make sure the BLUETOOTH^® feature is ON as indicated by .

• If needed, press OK and ^ at the same time to turn the BLUETOOTH^® feature on.
• The Sync symbol  flashes on the meter display.
• "Syncing Data" will appear on the app to notify you that the meter is communicating with the app.

• After syncing, the Sync symbol will disappear, the “Syncing Data” message will disappear on the app, and the app will display a list of any new results sent from the meter.

• Note: Inserting a test strip during the transmission will cancel the transfer of all results. The flashing  symbol appears on the screen and you can proceed with testing.

• OneTouch Verio Flex® - Product Guide
• OneTouch Verio Flex® – Pairing Instructions
• OneTouch Verio Flex® – Turning the Bluetooth® On or Off

AW 06932408 B