OneTouch Verio Flex® – Turn your meter on

• To turn your meter on, press and hold OK until the start-up test screen appears. Once the device is on, release OK. You can also turn the meter on by inserting a test strip.

• Every time you turn your meter on, a start-up screen will appear for a few seconds. All segments of the display should appear briefly, indicating your meter is working properly. If the meter does not power on, check the battery.
  • OneTouch Verio Flex® – Replacing the battery

• CAUTION:
  • If you see any missing segments within the start-up screen, there may be a problem with the meter. Kindly contact Customer Care.
  • NOTE: If you turned the meter on for the first time by inserting a test strip instead of pressing OK, you will not be able to perform a glucose test until you complete the first time setup.
    • ​​​​​​​OneTouch Verio Flex® – First time setup

• OneTouch Verio Flex® – Product Guide
• OneTouch Verio Flex® – Before you begin
• OneTouch Verio Flex® – First time setup
• OneTouch Verio Flex® – Replacing the battery
• OneTouch Verio Flex® – Turning the meter off
• OneTouch Verio Flex® – Getting to know your system
• OneTouch Verio Flex® – The Range Indicator feature

AW 07029805 A