OneTouch Verio Reflect® - Turn your meter on

• To turn your meter on, press and hold OK until the Welcome screen appears. Once the Welcome screen is displayed, release OK. You can also turn the meter on by inserting a test strip.

• Every time you turn your meter on, a Welcome screen will appear for a few seconds. If the meter does not power on, check the batteries.
  • OneTouch Verio Reflect® - Replacing the batteries

• CAUTION:
  • If you see any missing pixels within the Welcome screen, there may be a problem with the meter. Contact Customer Care. 

• NOTE: Whether you turn the meter on for the first time using OK or a test strip, you will need to perform first time setup.

• OneTouch Verio Reflect® - Product Guide
• OneTouch Verio Reflect® - Replacing the batteries
• OneTouch Verio Reflect® - First time setup
• OneTouch Verio Reflect® - Preparing The Meter

AW 07200005 A