Prepare the meter and view the last result:
1. Insert a test strip to turn the meter on
-
- Insert a test strip into the test strip port with the contact bars facing you.
-
- A start-up screen will appear for a few seconds. All segments shown here should appear briefly on the display, indicating your meter is working properly.
- CAUTION:
- If any segments shown here are missing in the start-up screen, there may be a problem with the meter. Contact Customer Care.
- If the meter does not power on, check the battery.
- Your last result will then appear and the last result icon will blink (
). If this is your first time using the meter, dashes will appear instead of a result.
- Next, the flashing blood drop icon
will appear on the display. You can now apply your blood sample to the test strip.
