Removing the used lancet:
- NOTE: This lancing device has an ejection feature, so you do not have to pull out the used lancet.
1. Remove the lancing device cap
-
- Remove the cap by rotating it and then pulling it straight off the device.
2. Cover the exposed lancet tip
-
- Remove end cap and use the saved lancet protective cover to recap lancet.
3. Eject the lancet
-
- Push the ejector forward to dispose of lancet in appropriate container.
4. Replace the lancing device cap
-
- It is important to use a new lancet each time you obtain a blood sample. Do Not leave a lancet in the lancing device. This will help prevent infection and sore fingertips.
