Using Your Lancing Device:
- For general information regarding the UltraSoft® 2 lancing device, see the following article:
Use Steps Of The Lancing Device:
1. Wash hands with soap and clean water, rinse and dry thoroughly.
2. Twist off the end cap of the lancing device.
3. Push lancet firmly into holder.
4. Remove lancet protective cover.
-
- NOTE: save the protective cover for safe disposal of used lancet.
5. Gently pull priming barrel until a click is heard.
6. Place the end cap firmly against finger. Press trigger button.
7. Remove end cap and use the saved lancet protective cover to recap lancet.
8. Push forward the ejector to dispose of lancet in appropriate container.
