OneTouch Verio Flex® – Error 4

• What it means:
  • One of the following may apply:
    • Not enough blood or control solution was applied or more was added after the meter began to count down.
    • The test strip may have been damaged or moved during testing.
    • The sample was improperly applied.
    • There may be a problem with the meter.

• What to do:
  • Repeat the test with a new test strip;
    • OneTouch Verio Flex® – Applying blood and reading results
    • OneTouch Verio Flex® – Testing with control solution
  •   If the error message appears again, contact Customer Care

• If there is a problem with your meter, error screens may appear. Along with an error number, there is also an error code in the upper left corner of your meter screen. If you cannot resolve the error with your meter, contact Customer Care. They will refer to the error number and code to help troubleshoot the problem.

• OneTouch Verio Flex® – Product Guide
• OneTouch Verio Flex® – Testing your blood glucose
• OneTouch Verio Flex® – Preparing your lancing device
• OneTouch Verio Flex® – Preparing the meter
• OneTouch Verio Flex® – Sampling blood from the fingertip
• OneTouch Verio Flex® – Applying blood and reading results
• OneTouch Verio Flex® – Testing with control solution
• OneTouch Verio Flex® – Error and other messages
• OneTouch Verio Flex® – Error 1
• OneTouch Verio Flex® – Error 2
• OneTouch Verio Flex® – Error 3
• OneTouch Verio Flex® – Error 5

AW 07029805 A